Hempel High Gel Protect Cream

Hempel's High Protect II is a two-component, solvent-free, high-build epoxy for osmosis protection and treatment. Easy to apply, and with good tolerance to environmental conditions, it forms a hard, tough, water-resistant coating and will dry to a very high film thickness. Use as a primer below the waterline on boats made of glass fibre or steel and for prevention and repair of osmotic blistering in glass fibre both above and below the waterline. Can also be used as a substitute for Light Primer where solvent emissions are a consideration.

• Size: 2.5Ltr
• Colours: Grey & Cream (use different colour for alternate coats for overcoating accuracy)
• Coverage: 6.6m²/ltr 
• Mix Ratio: 3:2
• Pot Life: 1hr 30min @ 10°C, 45min @ 20°C
• Minimum Application Temperature: 5°C
• Touch Dry: 24hrs @ 10°C, 12hrs @ 20°C
• Re-Coat (min/max): 18hrs - 11days @ 10°C, 8hrs - 5days @ 20°C
• Thinners (for clean-up of tools): No.5
• Do not thin
• Application: Brush / Roller / Airless spray (For professional use only)
• Available in 750ML or 2.5LT

Please note this is available for UK shipping only.